|
|
|
|
|
|
|
|
|
News
|
|
|
|
|
|
madIR-D
|
|
|
|
 |
|
IR sensors using single channel technology with IP54 ABS housing. Available in diffusion or flow sampling versions. Several measurement ranges are offered as standard, from 5 % to 100 % volumetric concentration, designed for various industrial applications.
- Miicroprocessor controlled
- Short response time (T90 < 45 seconds)
- Manual zeroing of the sensor possible, wither over internal button or externally over switche contacts
- Automatic permanent check of the sensor function. LED to show necesstity of calibration.
- Automatic temperature compensation
|
|
|
|
|
|
 |
|
|
|
|
|
GA-12plus
|
|
|
A further development from the tried and tested GA-12 hand-held analyser. This new analyser is equipped with the following extra features:
- Can be fitted with up to 4 electrochemical sensors.
- Suitable for a soot test using electronically controlled gas volume.
- Fitted with a powerful rechargeable Li ion battery.
- Big memory capable of storing 32 measurement reports.
|
|
|
|
|
 |
|
|
|
|
|
maMoS-100/200
|
|
|
- The maMoS-100/200 is a high quality stationary gas monitor for permanent measurement of one or two gas components.
- Comes complete with filter, Peltier dryer and condensate pump.
- Choice of gas sensors from electrochemical (O2, CO, NO, NO2, SO2, H2S) or infrared (CO, CO2, CH4, N2O).
- Analogue outputs for current/voltage are standard, as is a digital output over RS232C. These allow the gas monitor to be used for complex control applications.
|
|
|
|
|
 |
|
|
|
|
|
maMoS-300/400
|
|
|
- The maMoS-100/200 is a high quality stationary gas monitor for permanent measurement of three or four gas components.
- Comes complete with filter, Peltier dryer and condensate pump.
- Choice of gas sensors from electrochemical (O2, CO, NO, NO2, SO2, H2S) or infrared (CO, CO2, CH4, N2O).
- Analogue outputs for current/voltage are standard, as is a digital output over RS232C. These allow the gas monitor to be used for complex control applications.
|
|
|
|
|
cms-7
|
|
|
|
 |
|
- The stationary flue gas analyser is installed in a robust metal housing with a lockable transparent door. Suitable for wall or table mounting.
- The analyser assembly consists of three separate panels: power supply, gas conditioner and gas analyser.
- Sampling occurs over a heated hose with integrated heated inlet filter.
- The measurement values can be read directly from the gas analyser screen, entered into a PC using the RS232C interface or taken from the analogue outputs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a |
